040parts
040 Parts LED Dimmer compatible with VW T5, T6, California transforms simple LEDs
040 Parts LED Dimmer compatible with VW T5, T6, California transforms simple LEDs
DELIVERY TIME:1–3 BUSINESS DAYS**
Availability for pickups could not be loaded
Dekorationsartikel gehören nicht zum Leistungsumfang.
NO MORE DIY: Thanks to the original VW plugs, our set is guaranteed to fit and doesn't need to be tediously installed with tools - simply unplug the old connector, plug in the dimmer in between - done! Compatible with all VW Campers, T5, T6 California (not Transporter models or Multivan)
NO GETTING UP: Thanks to the included remote control, you can control all the LEDs in your camper from anywhere. No more getting up to turn an LED on or off.
NO UNCOMFORTABLE LIGHTING CONDITIONS: Our set makes your existing LEDs manually dimmable in 68 levels. Pre-programmed buttons ensure optimal lighting conditions! The dimmer remembers the last setting used.
EXPANDABLE WITHOUT TOOLS: All sets can be installed and removed within just a few minutes. You can easily add more sets and continue to control ALL LEDs with the same remote.
NO MORE GLARE: Two pre-programmed fade in, fade out buttons ensure that the lights gradually become brighter or dimmer, similar to when you lock your vehicle. So you won't be blinded by the LEDs when getting up, but can slowly get used to the light.
The LED controllers were specifically developed for all VW T5 and T6 California (Ocean/California/Comfortline/Beach/Coast) models and provide individually adjustable lighting conditions inside the vehicle.
What can the LED controller do?
- Adjust the interior light of the vehicle as you wish
- Four pre-programmed brightness levels: 100%, 50%, 25%, or 10%
- "1 min fade in" mode: light gradually transitions from dark to bright within one minute
- "2 min auto off" mode: light automatically turns off after 2 minutes
- bright/brighter: manual brightness adjustment
- last setting is saved and applied when switched on again
- normal operation of the light switches still possible
How is the LED controller installed in the vehicle?
Installing the LED controller is super easy. You don't need any special tools.
- Remove the cover glass by carefully prying it out with a small screwdriver.
- Carefully lift out the housing lock behind it using the screwdriver.
- Press in and pull out the connector between the vehicle and LED from both sides.
- Plug the LED dimmer between the connector of the vehicle and the LED lamp. The connectors are protected against polarity reversal and mixing up.
What's included in the delivery?
- Remote control including CR2025 battery
- Two dimmers or receivers
- Operating instructions
Can I expand the LED controller?
The LED controllers can easily be supplemented with additional sets. They are controlled together with just one remote.
Share
Manual: Download as PDF
Information on tax and shipping:
* Applies to deliveries within the EU; deliveries outside the EU are exempt from VAT.
** Applies to deliveries within Germany; delivery times for other countries can be found via the shipping information button.
Sicherheits- und Produktinformationen:
Hinweise zur Batterieentsorgung
In connection with the distribution of batteries or with the delivery of devices containing batteries, we are obliged to point out the following:
As an end user, you are legally obliged to return used batteries. You can return old batteries, which we have or have had in our range as new batteries, free of charge to our shipping warehouse (shipping address). The symbols shown on the batteries have the following meaning:
The symbol of the crossed-out dustbin means that the battery must not be disposed of with household waste.
Pb = Battery contains more than 0.004 percent by mass lead
Cd = Battery contains more than 0.002 percent by mass cadmium
Hg = Battery contains more than 0.0005 percent by mass mercury.
Please note the foregoing information.