The California Slim low-profile roof rack from 040 Parts was designed specifically for VW California vehicles with C-rail roof racks. Its aluminum and steel construction has panel dimensions of approximately 1250 Γ 130 millimeters and weighs 9 kilograms. The maximum evenly distributed load is 40 kilograms and must be distributed evenly to prevent deformation and damage. Installation uses four M8 T-slot bolts with washers and lock nuts, tightened to a maximum torque of 23 Newton meters. All you need for installation is a 13 millimeter wrench. Thoroughly cleaning the mounting surface and using edge protection will help prevent damage to the vehicle's paint. Two-person installation is recommended. The vehicle's total roof load, including the rack and mounts, must not be exceeded, so you must check the vehicle owner's manual.
