FBM_117_19_adapter_Nugget24 – Operating Instructions

The FBM_117_19_adapter_Nugget24 is an innovative Molle Board that is compatible with various vehicle models and is ideal for adventurers. During installation, the sliding nuts are first attached at position A using M5 screws, washers, and plastic spacers (15mm and 3mm height). The two rubber-coated magnets are then mounted at position B, using 25mm tall spacers, and a maximum tightening torque of 6 Nm must not be exceeded. The only mounting tool needed is a size 4 hex (Allen) key. The board may be loaded with a maximum of 20kg evenly distributed across its surface and must be checked before every trip. The transparent paint protection stickers protect the vehicle's paintwork from damage. It is important that the rubber-coated magnets are cleaned thoroughly and that the sliding nuts are inserted into the awning rail. Please observe the safety notes regarding the strong magnetic force and make sure that no parts protrude beyond the exterior mirror.