FBM_117_10_Molle_tool_VW_roof – Operating Manual

The FBM_117_10 Molle Tool is an innovative Molle board with special adapters for various vehicle models, particularly suited for VW vehicles with roof rail keder. Mounting is done using rubber-coated magnets and plastic spacers in standardized heights of 15mm, 3mm, and 25mm. The board is secured using M5 screws, washers, and T-nuts, requiring only a size 4 hex key. The maximum load capacity is 20kg when evenly distributed across the surface. Important safety notes: The extremely strong magnets pose pinching hazards, so a safe distance from the body is required. Contact with pacemakers must be avoided. The secure mounting should be checked before every drive, and protruding parts must not extend beyond the side mirrors. The driver is responsible for compliance with road traffic regulations. Proper installation and regular inspection are essential for safe operation.