FBM_117_1_117_13_Set_Marco_Polo – Instruction Manual

The FBM_117_1_117_13_Set_Marco_Polo Molle Board is a versatile accessory system that is compatible with various vehicle models thanks to special adapters. The set includes a robust Molle Board with rubber-coated magnets, plastic spacers in three different heights (15mm, 3mm, and 25mm), as well as mounting hardware like M5 screws and sliding nuts. Installation follows simple step-by-step instructions: First, the sliding nuts are screwed into the slotted holes at position A together with washers and spacers, then the magnets are attached at position B. For vehicle-side installation, the rubber-coated magnets must be thoroughly cleaned and inserted into the Keder rail. The board supports a maximum surface load of 20kg. Only a size 4 hex key is required for installation. It is important to securely fasten all items to prevent slipping during braking maneuvers. The strong magnets require caution to avoid pinch injuries.