FBM_117_1_117_11_Set_T_mit_C – Operating Instructions

The FBM_117_1_117_11_Set_T_mit_C is a high-quality Molle board compatible with adapters for a wide range of vehicles. The set includes a Molle board with two rubber-coated magnets, plastic spacers in various heights (3mm, 15mm and 25mm), M5x30 screws with washers, and M5 sliding nuts. Installation is carried out using a size 4 hex key. First, the sliding nuts are attached through the elongated holes at position A with the corresponding spacers and inserted into the rail. Then the magnets are mounted at position B with a maximum torque of 6 Nm. The rubber-coated magnets must be thoroughly cleaned before driving. The board may be loaded with a maximum of 20kg. Important: The extremely strong magnets require careful handling to avoid pinching hazards. All items must be securely fastened.