040 Parts Practical kitchen roll holder for VW T7 new California - reinforced version! – Operating instructions

Official instruction manual as download.

The 040 Parts Practical Kitchen Roll Holder is an innovative kitchen roll holder, specially developed for VW T5, T6, T6.1, T7 and California models.

The product is made from 1.5 mm thick powder-coated steel sheet and is delivered flat. Installation is done by precise bending at the designated perforations: Flange A is bent upwards by 90-95° or 45° depending on the vehicle type, Flange B is bent downwards by 90-95° to form a Z-shape, while hooks C and D are bent downwards respectively.

by 30-45°. For T5-T6.

1 models, the flanges are hooked behind the trim, allowing for subsequent repositioning and can be slightly over-bent to minimize rattling. T7 and new California models require adhesive strips for installation.

The steel sheet should not be moved back and forth multiple times to avoid damage. For cleaning, a damp cloth with mild detergent is sufficient.

Proper disposal should be carried out according to local metal waste regulations.

Questions about this product?

Our team usually responds within 24 hours.