FBM_114_comfort_drawer_750 β Operating Instructions
The rear pull-out SKU 10000000000146 is a practical solution for campers and vehicle owners who want to make optimal use of their trunk or cargo area. The pre-assembled system is easy to install and offers a maximum surface load of 200 kg with even weight distribution. Installation is done using T-bolts, metal washers, and nuts, which are tightened with a 13 mm or 17 mm wrench. The pull-out is first slid into the emptied cargo area and positioned against the rear hatch. The T-bolts are then placed into the rails under the rear plate of the pull-out and hand-tightened. It is important to check that it is properly anchored and that the drawer moves freely. The front brackets allow height adjustment for optimal adaptation to the loading edge. Be aware of the risk of pinching when moving the drawer and make sure the pull-out does not slip during braking.