FBM_112_1_Moskito_awning – Operating Manual

The "Mosquito Markise" mosquito net from 040 Parts measures 230 x 200 x 230 cm and is suitable both for the awning and for beds, indoors as well as outdoors. Its characteristic feature is the flexible attachment points, which can be mounted at any position to provide support or extension – for example, at the ground for fixation with stakes, at the top for hanging down, or at the sides to the vehicle or the awning support poles. To install the net holders, the rubber tab is opened, the net is inserted in one or more layers in between, and the tab together with the net is then pushed downward into the plastic frame, i.e., clipped in place; the cord can be fixed at any point with a knot. The included suction cups can be attached freely to the vehicle – recommended placement is centered at the top front of the awning housing and on the right and left at mid-height. The metal clips are used to close off the entrances or for any kind of fixation. A practical tip: During the day, the net can stay mounted and be gathered upward, for example, using four attachment points. The net material is made of 100% polyester, should be hand-washed, kept away from fire, and not packed away when damp.