133_3_Cali_Dachtraeger_schmal_T5_sliced_v2 β Operating Instructions
The flat roof rack California Slim is a high-quality roof rack specifically designed for VW California vehicles with C-rail roofs. The aluminum and steel panel measures approximately 1250 Γ 130 millimeters and weighs only nine kilograms. Four M8 T-bolts with washers and lock nuts are used during installation, tightened to a maximum of 23 Newton meters. The maximum distributed load capacity is 40 kilograms, with the load needing to be evenly distributed. Safety instructions must be observed during installation: there is a risk of crushing and falling, so the installation should be carried out by two people. The edge protection must be positioned centrally on the bent-up flanges. The roof surface must be thoroughly cleaned before installation, and a 13-millimeter wrench should be provided. The vehicle's total roof load must not be exceeded. The rack is not suitable for commercial use.